This tool assumes that all of these subwoofers will share the same airspace. Multi-chamber enclosures will be available in a future update.
Verify Driver Data
Published driver parameters and dimensions can be incomplete or incorrect. Verify the driver data before continuing, or skip verification and continue at your own risk.
Enter Missing T/S Values
Enter the missing published T/S values if you have them. If you do not have them, skip verification and continue to enclosure design.
Enter the missing values to enable simulation for this session.
Stored Driver Data
Compare the RMS rating and physical dimensions to the retailer or manufacturer page. If something looks wrong, update it here and save it for review.
Update any value that needs review.
This page contains affiliate links and the Diy Audio Guy may earn a small commission if you make a purchase. Beta users are limited to one set of plans per day.
Add Driver
Enter the published values you trust. Calculated fields are filled from the source values and locked so the driver stays internally consistent.
Enter T/S parameters exactly as published. For dual voice coil drivers, assume the manufacturer measured the T/S parameters with the voice coils wired in series unless the source says otherwise.
This simulation uses published manufacturer T/S parameters. Because published specs can be incomplete, inconsistent, or incorrect, simulation results should be treated as a helpful approximation of real-world performance.
This page contains affiliate links and the Diy Audio Guy may earn a small commission if you make a purchase. Beta users are limited to one set of plans per day.
Port Velocity
Excursion
This simulation uses published manufacturer T/S parameters. Because published specs can be incomplete, inconsistent, or incorrect, simulation results should be treated as a helpful approximation of real-world performance.
This page contains affiliate links and the Diy Audio Guy may earn a small commission if you make a purchase. Beta users are limited to one set of plans per day.
